丹陽申澳焊接材料有限公司
會員1.png)
丹陽申澳焊接材料有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
百分零部件網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2024-06-15 22:49:03瀏覽次數：109次
聯系我時，請告知來自 百分零部件網銅及銅合金焊絲常用于焊接銅及銅合金，其中黃銅焊絲也廣泛用于釬焊碳鋼、鑄鐵及硬質合金刀具等。選用適當?shù)暮附z進行氬弧焊是保證銅及青銅焊接質量的有效方法之一，不但可獲得性能良好的焊縫而且有利于減少焊件變形。用氧-乙炔氣焊時應配合銅氣焊熔劑使用,或使用已包有銅氣焊熔劑的銅焊絲。碳弧焊也是焊接銅及銅合金的常用方法之一，碳弧焊的焊接工藝和氣焊類似，焊絲及熔劑也和氣焊時一樣。
符合GB SCu6800
相當 AWS RBCuZn-B
S227是含少量鐵、硅、錳、鎳的錫黃銅焊絲，熔點約為880℃。熔融金屬流動性好，由于含有硅，可有效地抑制鋅的蒸發。
S227 is a tin brass welding wire with a small amount of iron, silicon, manganese, and nickel, and its melting point is about 880°C. Molten metal has good fluidity, and because it contains silicon, it can effectively inhibit the evaporation of zinc.
適用于銅、鋼、銅鎳合金、灰口鑄鐵的熔化極氣體保護電弧焊和惰性氣體保護電弧焊，以及鑲嵌硬質合金刀具等。
It is suitable for molten electrode gas shielded arc welding and inert gas shielded arc welding of copper, steel, copper-nickel alloy and gray cast iron, as well as inlaid carbide tools, etc.
| Cu | Sn | Ni | Si | Mn | Fe | Zn |
| 56.0~60.0 | 0.8~1.1 | 0.2~0.8 | 0.04~0.25 | 0.01~0.50 | 0.25~1.2 | 余量 |
| 盤裝Φ | 0.6 | 0.8 | 0.9 | 1.0 | 1.2 | 1.5 | |
| 焊絲直徑Φ （長度1000） | 1.5 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 |
1. 焊前必須仔細清理焊件被焊部位及焊絲表面。
2. 焊前一般預熱至400~500℃后施焊，氧-乙炔火焰焊時必須配銅氣焊熔劑或銅釬焊熔劑使用。
3. 焊接火焰應采用中性焰或輕微的氧化焰，適當降低焊接時的溫度，提高焊接速度，盡量減少熔池在高溫下的停留時間，以減少鋅的蒸發和氧化。
1. Before welding, the welded parts and the surface of the welding wire must be carefully cleaned.
2. Before welding, it is generally preheated to 400~500℃ before welding. Oxygen-acetylene flame welding must be used with copper gas welding flux or copper brazing flux.
3. The welding flame should be a neutral flame or a slight oxidizing flame. The temperature during welding should be appropriately reduced, the welding speed should be increased, and the residence time of the molten pool at high temperature should be minimized to reduce the evaporation and oxidation of zinc.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
百分零部件網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
