蘭州海蘭德泵業有限公司
會員1.png)
蘭州海蘭德泵業有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地蘭州市
百分零部件網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2024-10-12 10:54:29瀏覽次數：24次
聯系我時，請告知來自 百分零部件網MZ磁力驅動自吸泵MZMagneticDrivenSelf-PrimingPumpMZ磁力驅動自吸泵MZMagneticDrivenSelf-PrimingPumpMZ型磁力驅動自吸泵
MZ磁力驅動自吸泵
MZ Magnetic Driven Self-Priming Pump
MZ型磁力驅動自吸泵，主要是為容器和槽車卸載而設計的，用于液槽抽排、罐車卸貨，確保排出進口管路中的空氣迅速引液，可供輸送液態烴、汽油、煤油、柴油等石油產品和化工、制藥等行業易燃易爆、有毒有害的液體，尤其適用于船用油泵和陸地油庫、油罐車的裝卸用泵。
MZ magnetic driven self-priming pump is designed mainly for unloading vessels and tanker cars, to ensure quick priming by removing the air in the inlet and discharge piping; it can convey petrochemical products such as liquid hydrocarbon, gasoline, kerosene and diesel oil and inflammable and explosive, toxic and harmful liquid in chemical and pharmaceutical industries, and is especially suitable as vessel oil pump and handling pumps for onshore oil depot and oil tankers.
結構說明 Description of structure
1.臥式、外混式、自吸性能好。
2.磁力驅動、全密封、無泄漏。
3.泵體采用底腳支撐，軸向吸入、徑向排出。
4.葉輪為閉式葉輪，軸向力主要采用背葉片平衡，殘余軸向力由滑動軸承承受。
5.當液體在泵內循環時間較長時，為防止內部循環液的溫度升高，可設置溫控保護裝置。
6.管路中不需安裝底閥，工作前只需保留泵體內儲有定量引液即可。
7.后拉出式設計，可以不動進出口管路，即可維修，使用方便。
8.可采用與電機直連或膜片式聯軸器連接的形式。
1.Horizontal and external mixing type, with good self-priming performance.
2.Magnetic driven, fully enclosed and leakage free.
3.The body is supported with feet, with axial suction and radial discharge.
4.The impeller is enclosed type; the axial load is balanced mainly with back vane, and the residual axial load is taken by sliding bearings.
5.When liquid circulates within the pump for a long time, to prevent heating up of such circulating liquid, temperature control protection device can be provided.
6.It is not necessary to install a bottom valve in the piping, and before operation, it is only required to have given amount of priming liquid within the pump body.
7.It is in rear pull-out design, so maintenance can be done without involving the inlet and discharge piping, convenient in use.
8.Either direct driving by motor or connection via diaphragm coupling can be used.
性能范圍 The main specifications
流量 Capacity 1.6～400m3/h
揚程 Head 20～125m
介質溫度 Temperature -20℃～+120℃
進口直徑 Import diameter 25～200mm
工作壓力 The max working pressure 1.6MPa
型號意義 Type denotation
泵常用材料 Common pump materials
標準性能表 Standard performance table
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
百分零部件網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
